Jump to content

ENGINE FLAME OUT


munirabbasi
 Share

Recommended Posts

Thank you. based on this and your previous mentioning the shift

to another engine, it sounds like you have a rollback, a problem

with the synchrophaser. Check out synchrophaser, sych rack, and

also run synch box tester. sometimes the problem can be a false

signal generated by a seemingly good valve housing. also check

all 4 prop pulse generators.

Link to comment
Share on other sites

5 hours ago, pjvr99 said:

Thank you. based on this and your previous mentioning the shift

to another engine, it sounds like you have a rollback, a problem

with the synchrophaser. Check out synchrophaser, sych rack, and

also run synch box tester. sometimes the problem can be a false

signal generated by a seemingly good valve housing. also check

all 4 prop pulse generators.

Thanks

Regards Munir Abbasi

Link to comment
Share on other sites

  • 2 weeks later...
  • 4 weeks later...

Pjvr99 do u know what actually happend in this case???? Look dear as mr. Muneer is saying problem shifted to No. 4 and No. 1 respectivly..... So NOW THE QUESTION IS IF NTS BRACKET WAS FAULTY THEN Y IT SHIFTED TO OTHER ENGINES???

No doubt NTS may also b the reason but only for one engine not for all. 

Link to comment
Share on other sites

49 minutes ago, Moeed hassan said:

Pjvr99 do u know what actually happend in this case???? Look dear as mr. Muneer is saying problem shifted to No. 4 and No. 1 respectivly..... So NOW THE QUESTION IS IF NTS BRACKET WAS FAULTY THEN Y IT SHIFTED TO OTHER ENGINES???

No doubt NTS may also b the reason but only for one engine not for all. 

Dear moeed as you that what is synchrophaser stabilizing mode and throttle anticipation. Please consult T.O IC-130B-2-11. How NTS system  works?

Thanks

Regards

Munir Abbasi Home of hercules Pakistan   

Link to comment
Share on other sites

19 hours ago, Moeed hassan said:

Job guides are there for fault isolation..... Ok fine with the throttle anticepation but my question is how probkem shifted to other engines if the problem was with NTS BRACKET itself... 

Moeed Hussain Sb GS/JG/FI/FR are familiar with them, how to coordinate FR with FI

Regards

Munir Abbasi

Link to comment
Share on other sites

My dear respected munir abbasi.....do u means how to consult FI according to reported defect???? 

Ok cool. 

It is pretty difficult to write it here but in short first of all u will find the FAULT CODE of your defect in the CONCERNING SYSTEM FI..... after geting code u will have to fine that code in the same FI and then u will b able to isolate that fault according to FI. 

I THINK IT WOULD B HELPFUL TO U. 

REGARDS. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...