Jump to content

ATM GENERATOR won’t run ESS Bus


Kmody
 Share

Recommended Posts

Struggling with an ongoing ATM gen problem. Getting good freqs good volts. Turn ATM gen to on gen out light does not come on but the ESS bus off lite stays on and all systems requiring 3 phase power do not work. 

 

The single phase AC items on bus do work. AC instrument fuel control bus works and Elevator trim works. 

We have changed contactor, generator, GCP, and voltage regulator multiple times with no luck. Anyone seen this??

 

Thanks

 

Link to comment
Share on other sites

On 10/4/2018 at 7:32 PM, Kmody said:

Struggling with an ongoing ATM gen problem. Getting good freqs good volts. Turn ATM gen to on gen out light does not come on but the ESS bus off lite stays on and all systems requiring 3 phase power do not work. 

 

The single phase AC items on bus do work. AC instrument fuel control bus works and Elevator trim works. 

We have changed contactor, generator, GCP, and voltage regulator multiple times with no luck. Anyone seen this??

 

Thanks

 

Have check battery was connected and  SW solenoide CB push in? EXT power contactar is not de-energized , check the K9 contactor

Thanks

Regards

Munir Abbasi Home of hercules pakistan

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...