Jump to content

APU LOAD CONTROL VALVE NOT WORKING AND APU NOT SHUTTING DOWN


Shola
 Share

Recommended Posts

GTCP85-180L starts and run well. However,  no bleed air from  the APU. Load control valve replaced with new one but no change. In addition,  APU doesn't shut down normally unless by the pull of fire handle. Any help please?

Link to comment
Share on other sites

17 hours ago, Shola said:

GTCP85-180L starts and run well. However,  no bleed air from  the APU. Load control valve replaced with new one but no change. In addition,  APU doesn't shut down normally unless by the pull of fire handle. Any help please?

Aircraft type is C130H. 

Link to comment
Share on other sites

On 7/7/2019 at 12:30 PM, Shola said:

GTCP85-180L starts and run well. However,  no bleed air from  the APU. Load control valve replaced with new one but no change. In addition,  APU doesn't shut down normally unless by the pull of fire handle. Any help please?

Hi !

Did you checked the Overspeed Solenoide, Valve?

Did you preformed the continuity checks on both electrical plugs (on Load Valve and Solenoid Valve)?

The Filter Between the Load Valve and the Solenoid Valve is clean and Tightened?

Just some questions and some leads!

Kindest Regards!!

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...