uncle sam Posted September 8, 2015 Share Posted September 8, 2015 Goodday,Anyone can help me for the reference that we can installed the MLG Ballscrews with different vendor.ie... On the LH we installed the western Gear and RH with Calco gear. Are there any service news of specific publication that allow us to mixed the installation?Thank You. Quote Link to comment Share on other sites More sharing options...
hehe Posted September 8, 2015 Share Posted September 8, 2015 What year and model? Quote Link to comment Share on other sites More sharing options...
larry myers Posted September 8, 2015 Share Posted September 8, 2015 If there was a requirement to match mlg ballscrews by manufacture the technical order would so state. Absent such guidance the issue becomes a nonissue. Quote Link to comment Share on other sites More sharing options...
uncle sam Posted September 9, 2015 Author Share Posted September 9, 2015 Thank you Larry . I got difficulties to explain to the customer that so worry. They need a ref. to showed that its can be done. Quote Link to comment Share on other sites More sharing options...
hehe Posted September 9, 2015 Share Posted September 9, 2015 I did find a good bit of lockheed service news that talked about western/calco gear components.Nothing specifically talking about not mixing them from what I could find but they might be worth a read for you (for all purposes if they are suitable parts numbers the vendor should not matter)search these for Calco or Western, hope this helps.http://www.lockheedmartin.com/content/dam/lockheed/data/aero/documents/global-sustainment/product-support/Service-News/V18N2.pdfhttp://www.lockheedmartin.com/content/dam/lockheed/data/aero/documents/global-sustainment/product-support/Service-News/V10N2.pdfhttp://www.lockheedmartin.com/content/dam/lockheed/data/aero/documents/global-sustainment/product-support/Service-News/V7N4.pdfhttp://www.lockheedmartin.com/content/dam/lockheed/data/aero/documents/global-sustainment/product-support/Service-News/V7N3.pdfhttp://www.lockheedmartin.com/content/dam/lockheed/data/aero/documents/global-sustainment/product-support/Service-News/V4N4.pdf Quote Link to comment Share on other sites More sharing options...
Bogi252 Posted November 24, 2015 Share Posted November 24, 2015 As each MLG Ballscrew is approved by part number, ensure that the alternative you are installing are listed in the AC IPC. Once this is confirmed, I agree with Mr. Myers, there is no other requirement to match part numbers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.