Jump to content
Aero Precision provides OEM part support for military aircraft operators across more than 20 aircraft

TO 1C-130A-3 Change Date

Recommended Posts

  • 1 year later...

DISCLOSURE NOTICE - This information is furnished upon the condition that it will not be released to
another nation without the specific authority of the Department of the Air Force of the United States, that it
will be used for military purposes only, that individual or corporate rights originating in the information,
whether patented or not, will be respected, that the recipient will report promptly to the United States, any
known or suspected compromise, and that the information will be provided substantially the same degree
of security afforded it by the Department of Defense of the United States. Also, regardless of any other
markings on the document, it will not be downgraded or declassified without written approval of the
originating United States agency.

DISTRIBUTION STATEMENT C - Distribution authorized to U.S. Government agencies and their contractors
(Administrative or Operational Use) (24 November 1998). Other requests for this document shall be
referred to 580 ACSG/GFEAH, Robins AFB, GA 31098.

WARNING - This document contains technical data whose export is restricted by the Arms Export
Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979, as amended, Title
50, U.S.C., App. 2401 et seq. Violations of these export laws are subject to severe criminal penalties.
Disseminate in accordance with provisions of DoD Directive 5230.25.

  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...