Jump to content

C130H TILT


Jerem
 Share

Recommended Posts

Bonjour, ma panne est:

L'avion penché à gauche des moteurs sont un 19600LBS, Frein appliquer.

3 services Amortisseur effectuer sur vérin

Pression bloc de frein OK

Dissymétrie Carburant vérifiée avec manuel OK.

Avez-vous des solutions ou un retour d'expérience?

 

Link to comment
Share on other sites

2 hours ago, Jerem said:

Bonjour, ma panne est:

L'avion penché à gauche des moteurs sont un 19600LBS, Frein appliquer.

3 services Amortisseur effectuer sur vérin

Pression bloc de frein OK

Dissymétrie Carburant vérifiée avec manuel OK.

Avez-vous des solutions ou un retour d'expérience?

 

 
Hello, my breakdown is: The plane leaned to the left of the engines are a 19600LBS, Brake apply. 3 services Shock absorber on cylinder Brake block pressure OK

Dissymmetry Fuel checked with manual OK.

Do you have solutions or feedback?
Link to comment
Share on other sites

https://www.google.com/search?client=firefox-b-1-d&ei=tbPCXbfMB4S4tQWJ-Kb4Bg&q=translate+french+to+english&oq=translate+fre&gs_l=psy-ab.1.0.0l10.15144.22059..23808...0.0..0.94.272.4......0....1..gws-wiz.......0i67.KVTBNooKRTg

WHAT DID WE EVER DO WITHOUT GOOGLE/INTERNET

Leaned left sitting static or during movement on landing

 
Penché à gauche assis ou pendant le mouvement à l'atterrissage
Edited by NATOPS1
Link to comment
Share on other sites

Had it translated,

 

Peter, I think he mixed up with different things: translation: the plane leand left, engines are at 19600lbs, brake applied...
3 services shock absorbers serviced, brake lock pressure ok...
Dissymetrie fuel checked with manual and ok..
Do you have a solution or experience?

 

As I understand it:

 during runup with engines at 19600"lb, aircraft was left wing low. Fuel quantity balance was manually/dipstick checked ok. struts were serviced/checked 3 times. brake pressures ok. 

Link to comment
Share on other sites

  • 2 weeks later...

yes I do, I will try to keep it short, in order to prevent wing droop, pick the flaps up,next put somebody taxi quald. in the left seat, you need 10 kts or less  head wind [ off the nose ] for good numbers. if you are re-calibrating torque gauges do two engines at a time [outboards then inboards] next pull everything to g/i , once everything has stabilized push all 4 up beyond crossover and do a prop. re-sync/index. that should prove any problems or fix them. I used to put a pilot in left seat, mech. in right, a q/a guy in my seat, I would stand behind them and watch the store. good luck I hope this helps  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...