Jump to content

Phenolic Block?


joemontyb
 Share

Recommended Posts

I can not find a part number for a phenolic block, the block is in the NLG. Their are two hydraulic lines that go to the steering control valve and the two swivels on the upper left side of the nose gear. There is a bracket on the NLG upper assembly. The two hyd lines run through a phenolic block. I need to know what where to find the part number. I have tried the 1C-130H-4 and found nothing.

Link to comment
Share on other sites

The phenolic has most likely been replaced with a plastic block. You can always take the blocks you have on the aircraft to the local Metals Tech Shop for a local manufacture job. They have usually have the solid stock plastic on hand and can mill it out as per sample or from scratch if you know the tubing dimensions.

Link to comment
Share on other sites

If this is it, the NSN is 4730-01-100-8710, there are some available in supply.

Sorry Mike, I was bored.

Please submit an AFTO22 and add the clampblock as Fig 2, Item 11, since it is part of the 373528-1 bracket assembly, Item10.

You can actually order the whole assembly, there are some of them is supply as well.

tINY

Edited by tinyclark
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...