Spinner Dimensions

[Propellers]

Hi All,

Need some help finding basic dimensions of the spinner. I need it for my 1:12 scale model of prop. ( http://propellers.us/Project-C130-Hercules.htm ) I think I have pretty decent 3D model but not sure about the spinner. I would love to have it done as accurate as possible. Below are pictures what I am looking for. I would appreciate any help or info where I could find it

Thanks,

George

[MAXTORQ]

You want both Front and Rear spinner measurements?

First pic is rear spinner only.

Second is front and rear

[Propellers]

Thanks Max for quick reply, I really appreciate it.

I need:

1. Rear Spinner Diameter at the aft edge,

2. its length front to back rim

3. Front Spinner length

Dimensions do not have to be very precise. Tape measure is adequate.

This will let me recreate exact shape of the spinner. I afraid my model came out a little to long.

George

[MAXTORQ]

Give me a bit and I'll get them for ya.

[MAXTORQ]

First Pic.......... 29inches.

Second Pic ...........31 inches

[Propellers]

First Pic.......... 29inches.

Second Pic ...........31 inches

Thanks so much MaxTorq,

So I was right that 1/12 scale model plans were off. Spinner looked way to small next to the blades.

Thanks for your help.

George