Jump to content

Pulley Assy


thunderturk
 Share

Recommended Posts

I believe he is talking about the pully assemblies we use in conjunction with the static line retreivers for CDS airdrops. The -9 is the loadmasters bible/TO for onloading/offloading and airdrop of equipment.

Thunder: I looked around but couldn't find a P/N for you.

Link to comment
Share on other sites

The only two pulley I see mentioned in any of the books I have are the Snatch Block cable pulley, and the Overhead Delivery System hoist pulley.

I don't have a copy of the -9, so i can't see what pulley you guys are referring to, or where it is.

Edited by tinyclark
Link to comment
Share on other sites

Let me go to my old memory bank, One part was a strap that was hung around the

overhead framework supporting the Hog trough at the ramp hinge. This could be fabricated

at the parachute shop. The pully could be picked up at Home Depot or any hardware

store. As long as you could support the diameter of the static line retrever cable and

was strong enough. That's all I can remember

Rg Glenn Secrest

Link to comment
Share on other sites

We ran into that issue a few years back. Seems some of that stuff made it to the desert, but didn't quite find it's way home.

Glenn hit it right on the money, although I'm not sure about the Home Depot portion. I think we ended up rooting through parts bins in maintenance to find what was needed and ordered it.

There are a number of different connector straps, I think with NSN part numbers on them. I'm not sure where to direct you on those.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...