Jump to content

Length Adjustable Hydraulic Unions


smoedog
 Share

Recommended Posts

  • 4 weeks later...

LS6962 is an adjustable union with two male flareless ends. It is adjustable in length and designed for hydraulic usage. They are used on the C-130. One location for sure is FS 204 LH side just aft of the galley. Good luck.

Cool, to late though.

We had a plane in the desert that the exact one your talking about started leaking, but we got the number from afets

Link to comment
Share on other sites

It may have been late for you but now others know such a thing exists and what the basic part number is. A little insight is that at body mate these unions are adjusted as required to connect tubing as the fuselage is brought together. They are not always right at the break point but they are always on a horizontal section of the tubing. Good luck hydraulic dogs and be thankful the C-130 doesn't use Skydrol.

Link to comment
Share on other sites

Cool, to late though.

We had a plane in the desert that the exact one your talking about started leaking, but we got the number from afets

Too bad we didn't know you were looking for a specific piece on a line. With that info, we could have helped you out too.

An AFETS Brethren

Link to comment
Share on other sites

Picture please!

Here is what the two kinds of adjustables look like. Tiny's right an area to look at is always nice and makes finding things just a little faster!!

By the way the part numbers are LS6962XX and LS6963XX bulkhead adjustable(bottom picture)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...