Jump to content

ATM GEN OUT LIGHT


sojudemon
 Share

Recommended Posts

Really isn't anything there besides the contactor, GCU and the light assy. You can pull the wire off the terminal board that goes to terminal 2 of the light assy, though I have no idea what aircraft you have, so I can't say what the TB or terminal # is.

ESU-TB5A, terminal 9?

See if the light goes out. If it doesn't, the light assy circuit is bad.

Edited by tinyclark
Link to comment
Share on other sites

There is a good chance the PIR(Power Indicator Relay) or the blocking diode going to the PRI is bad. I believe they are both in the generator control panel. I would change the GCP and give it a shot.

Hope this helps. Let us know what you find.

Link to comment
Share on other sites

If the circuit is identical with H model (for the light to remain “off†needs 28v to be delivered from FSR to the GCP) therefore you may have:

1-FSR malfunction.

2-Continuity between FSR and GCP is broken.

What’s up by me!!!!.... “Non senseâ€.

Memory alone misleading. (TSN Exceed 464,000,000)hrs. Apologize.

Back to the books.

Yet book troubleshooting leads only to:

1- ATM Generator Control Panel (GCP).

2- ATM Generator Contactor.

Since both had been changed.We should look for the unusual……. (Defective Wiring)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...