mm130b Posted June 19, 2013 Share Posted June 19, 2013 When gtc start motor rotate 3 to 5 second than electric fuse cut out,fcu,oil pump removed accessory drive free rotate .turbine. also free rotate.wireing & all relay check found good, Quote Link to comment Share on other sites More sharing options...
Steve1300 Posted June 19, 2013 Share Posted June 19, 2013 Measure your current draw to the starter motor. It may well be only a short in the motor. Quote Link to comment Share on other sites More sharing options...
mm130b Posted June 20, 2013 Author Share Posted June 20, 2013 Measure your current draw to the starter motor. It may well be only a short in the motor. Motor changed replace new one but problem still Quote Link to comment Share on other sites More sharing options...
JTECH Posted June 20, 2013 Share Posted June 20, 2013 try checking too see if your relay is working and delivering power to the starter? Quote Link to comment Share on other sites More sharing options...
NATOPS1 Posted June 21, 2013 Share Posted June 21, 2013 Swap out your current limit control Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.