Jump to content

Generator


sharif101
 Share

Recommended Posts

03xgen consumed up to this which were installed with #2 Eng. Defect: after one or two hours flg just before ldg found no volt&frequency. Shutdown the Eng & ck found gen excessive heated up which is unable to touch. Cooling duct, generator rotation, generator coupling with RGB & load ck found normal. I've not got any other reason. Pl help me if any other point. Thanks.

Link to comment
Share on other sites

With one-two hours of flight and the GEN fails on approach check the loadmeter and see how high it is with the Aux Hyd pump on.

If your crew turns the Aux Hyd pump on before landing it may be running at a very high load run longer than during preflight/engine start as those only take a few min where approach will take an extended period of time.

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...