Jump to content

Help me troubleshoot!

Nate Anderson

Recommended Posts

I have an ECHS problem. One of our strech J's has all of the RH pallet locks, and PLCUs, not communicating with the MFCD. Actually it's all RH side and the LH side ramp locks that cannot be controlled/not communicating. Our bird just came back from Depot for the LAIRCM mod and now the pallet locks are jacked up. I've been looking in the WD but can't find anything that's in common with one whole side or the other. Any input is welcome/needed as I'm not too "savy" on this particular system. Please and thank you


                                      Mr. Sickof Chasingmytail

Link to comment
Share on other sites

  • 2 weeks later...
On 4/15/2018 at 5:41 PM, hehe said:

There are huge cannon plug disconnects for echs that kill entire sides.  look forward of booster reservoir and aft near the ring sections where aircraft is extended.  most likely one of those is loose

Thanks for the help, you hit the nail on the head. Cannon plug was half connected near hydraulic reservoir. Thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...