aggie1979

Thanks for the replies. Yeah I realized I posted in the wrong forum section, couldn't change it. It turned out to be the anti-skid valve. :)

Port aft brake is the only one that overheats. We did a check out of the brake system. Found the port forward brake wasn't getting the correct pressure under normal brakes. When emergency brakes were applied, the system pressure was normal at all brakes. The rest of the brakes were operating normal under normal braking. To correct the issue, we found that the anti-skid valve wasn't porting the pressure properly. We also changed the brake half the dust boots melted off. I was thinking it might be the brake fuse on the normal side of the port aft brake. We also had the anti-skid tested. It checked good. Any ideas would be helpfull, thank you!:confused: Has any ever had this problem occur. :confused: