Hello all,
Working on a KC-130T-30 and having an issue with the #2 and #4 generators holding a load. Replaced multiple components: #4 gen contactor, one of the bus tie contactors, #2/4 GCP, #4 voltage regulator. Generators will power on and give good freqs and voltages but when switched to on will not carry essential bus or a heavy load. Occasionally we can get either to pick up a bus or remove applied loads and slowly turn items on till the gen out light illuminates and freq and volts are zero. Have verified wire continuity and voltages while gen is operating normally everything checks good. When gen is in a failed state the normal voltage at the voltage regulator pin F should read 5~13 volts DC will read 100+VDC. All systems function normally with gen #1, #3 and APU supplying power. Any insight would be greatly appreciated.