Jump to content

Mcmuffin07

Members
  • Posts

    8
  • Joined

  • Last visited

    Never

Posts posted by Mcmuffin07

  1. MC-130H, initial write up was that the sync wouldn't hold. 5 or 6 minutes and then it would let go like there was no master. we changed the sync, and our new issue is when #2 is selected as a master, all others drop about 2%. when #3 is selected, #2 shoots up 2% but #1+4 sync up good, follow on the droop ck and everything. we changed the sync again, didn't fix it. tried looking into the pulse gen on #2 thinking it was screwed up and found a broken wire. fixed it, ohmed it out and it was good, but the problem remains. haven't really got the downtime to work it since technically it's flyable but i'm thinking about the sync rack and wiring next. any input would be helpful, she's been broke for a few weeks now.

  2. Haha i think i'm a little late on this one, but i'd measure the bellows. maybe ruptured, 850 TIT at 40% on start sounds like ruptured bellows to me. you could change the bellows individually and save about $70K but personally...i'd rather change the FCU haha

  3. check to see if your torquemeter is the midbearing type, and if not that could be your cause. did you do an engine signature run and send data to Kirtland yet? also might suggest a torquemeter runout, per the 71jg-00-3. otherwise i got nothing haha.

  4. OK, ten I get it. So when do we go to 100% flaps?:)

    The only time we do it is in hot weather with a tail wind so the engine will actually start, otherwise its usually all the way up, or 50% during runs to relieve stress on the tail and to prevent all the bouncing.

  5. that old -7 engine is a piece, the fuel control especially, if you pull the throttles back too quick and you're on descent it doesnt give the altitude compensator time to adjust very well, and that could cause your flame out, or maybe they lost hydraulic pressure in the prop and pitchlocked it, then when the throttles were brought back rpm is tied to the power so that could cause it, not likely on all four though. yeah i'm still workin '62 models in the desert to this day haha

×
×
  • Create New...