Metalbasher Posted February 8, 2013 Share Posted February 8, 2013 Guys I'm trying to find out a TCTO number for an old TCTO. I'm pretty sure the TCTO came out in the mid to late 70s and pertained to the T-56 QEC kit. The problem was the upper QEC kit longerons were corroding due to improperly placed drains holes located in the multiple longeron cavities. The drain holes were actually too far from the radius in the corners, thus allowing water to puddle in the radius vs. drain. The TCTO stated to apply sealant or damning compound to the corners and smooth out thus forcing the water to migrate back toward the drain holes for draining. Any help in identifying the TCTO number is greatly appreciated. Thanks Scott Quote Link to comment Share on other sites More sharing options...
Ronc Posted February 11, 2013 Share Posted February 11, 2013 Scott, I remember having to dig out all that old sealent, remove two of the four bolts and have NDI out to check for corrosion. We would then reinstall the first two bolts torque them down and begin the process once again with the remaining bolts. This happened in the mid 80's, do you think this is the same TCTO you are looking for? If so I may be able to find the TCTO number from our engine shop. Ron Quote Link to comment Share on other sites More sharing options...
Metalbasher Posted February 11, 2013 Author Share Posted February 11, 2013 Ron It might be something tied to it. I remember as an airman both replacing the upper longerons because of corrosion as well as applying sealant/damming compound. If nothing else, the TCTO in which you are referring to might refer to the earlier TCTO. I appreciate the help. Scott Quote Link to comment Share on other sites More sharing options...
Ronc Posted February 12, 2013 Share Posted February 12, 2013 I will inquire the very next time I go to the engine shop Ron Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.