Jump to content

Eng Gen 1, 2 and 4 fail on C130J


brownnard
 Share

Recommended Posts

Engine Generators 1, 2 and 4 fail acaws keeps coming up when engines are upsped to normal ground idle. Fault is intermittent and has occured on multiple attempted flights and maintenance ground engine runs. 

Anyone seen this before or have any input?

 

Cheers

Link to comment
Share on other sites

I'm assuming you have exhausted the FI for the associated faults?

What are loads on TR's?

What part number generators are you using?  There are two different C-130J generators.

Have you recently completed any heavy maintenance or are these pilot reported from a flight?

Foreign J?  USAF?

Link to comment
Share on other sites

  • 2 months later...

Not an Avionics tech, but I have seen something similar. From memory #3 Gen powers the Main AC Bus, but when #2 tried to power the Ess AC Bus there was an issue that would cause the three Gens to individually fall as each tried to power the Ess Bus. So the thinking was a loose connection or faulty earth. Now to throw a spanner in the works, in this case it ended up being an issue with one of the Props (Can't remember which one) De-Ice Timer Units being dodgy that created a similar effect. 

Good luck.

UPDATE: Spoke to the AvTECH on the job, the issue ended up being Deicing Eng 3 short.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...