Jump to content
Aero Precision provides OEM part support for military aircraft operators across more than 20 aircraft

Recommended Posts

hello

i am structure repair man

i have any question so i write this post

i knew LS4211 when i read SRM

i shall make repair member with above material

what is LS4211?(it is same 2024-T4?)

what is LS spec?

Share this post


Link to post
Share on other sites

LS4211 is the LMCO part number for raw stock extrusion.  It could be an L angle, T angle, round stock etc.  For example, the crew door longeron (runs for to aft at the top of the crew door frame) has an LS #.  That equates to the stock...actually an L angle, 1 1/2" by 3" with the 3" side being tapered from .125" to .060" and 12' long or something like that.  Far more easier to order the LS material than to try and locally fabricate. 

Share this post


Link to post
Share on other sites

thanks for your response

thanks to your reply i understand that material

i have another question

how to know detailed ls spec? 

where do i get ls spec information?

Share this post


Link to post
Share on other sites

All the LS extrusions are detailed in the 1C-130A-3, to include detailed pix and dimensions of each LS extrusion.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...