RobSmooth Posted March 13, 2019 Share Posted March 13, 2019 TIT flukes 10-20 degrees , torque and fuel flow doesn't follow. Thermocouples and Tblock check good? Quote Link to comment Share on other sites More sharing options...
pjvr99 Posted March 13, 2019 Share Posted March 13, 2019 assuming you have already swapped guages, so i would then shoot TIT from the firewall using TD tester, and bumping the TIT wires all the way to the cockpit. Next step would be to check power wires to the guage, and also whether it is grounded properly. Quote Link to comment Share on other sites More sharing options...
NATOPS1 Posted April 1, 2019 Share Posted April 1, 2019 Flux all the time or maybe only with prop anti ice on? Quote Link to comment Share on other sites More sharing options...
Moeed hassan Posted April 1, 2019 Share Posted April 1, 2019 Plz chek the y type HT lead.... Or any loose terminal end.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.