Tech data for removing/installing HC-130P Rescue Bins

[GACFaja]

Another puzzler: what tech data would we use to remove/install the rescue equipment bins, forward (and above) the Benson tank on an HC-130P? I had hope when I found them mentioned in the 25GS-00-1...but there's no corresponding procedure in the 25JG-00-1. Got an LSET hitting here in less than 2 weeks and I get the feeling that the 1-1A-8 and the 1C-130H-4-25-1 ain't gonna cut it.

Thanks!

[tinyclark]

Another puzzler: what tech data would we use to remove/install the rescue equipment bins, forward (and above) the Benson tank on an HC-130P? I had hope when I found them mentioned in the 25GS-00-1...but there's no corresponding procedure in the 25JG-00-1. Got an LSET hitting here in less than 2 weeks and I get the feeling that the 1-1A-8 and the 1C-130H-4-25-1 ain't gonna cut it.

Thanks!

That's what they were using here at Moody, the GS and the 1-1A-8. You could also use the IPB, which shows all the hardware, -4-25-1, section 25-20-00, fig 9-9d.

Or, you could do what we are doing here now. The rescue bins and personnel equipment bins have been removed per request of the 71RQS commander to eliminate configuration problems.