miamiair Posted June 3, 2010 Share Posted June 3, 2010 I am in need of a TO for an E-3 Elevator (16C1-7-18-3). I am a commercial MRO, thus not entitled to go to the USAF to get them. Any ideas? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
INS/Dopplertroop Posted June 3, 2010 Share Posted June 3, 2010 Try newportaero.com Quote Link to comment Share on other sites More sharing options...
miamiair Posted June 3, 2010 Author Share Posted June 3, 2010 Try newportaero.com I tried them already; the 8-10 week lead time makes it a deal breaker. Quote Link to comment Share on other sites More sharing options...
bischoffm Posted June 3, 2010 Share Posted June 3, 2010 Contact Tinker Air Force base office in the front of the manual to get permission for you to download or have them send it to your company. Thats the only thing I can think of. I can send excerpts only from the book or look up part numbers if you like. Quote Link to comment Share on other sites More sharing options...
miamiair Posted June 7, 2010 Author Share Posted June 7, 2010 Contact Tinker Air Force base office in the front of the manual to get permission for you to download or have them send it to your company. Thats the only thing I can think of. I can send excerpts only from the book or look up part numbers if you like. The elevator we have is a -9. We got it without the hinge fittings. We need to do a trial balance check, and that is impossible without the fittings. The poor thing has had the snot beaten out of it by hail. So what I would need are the P/N's for the hinge fittings to get a set. Quote Link to comment Share on other sites More sharing options...
bischoffm Posted June 8, 2010 Share Posted June 8, 2010 Are these them??:confused: Quote Link to comment Share on other sites More sharing options...
miamiair Posted June 9, 2010 Author Share Posted June 9, 2010 That's them, "A," "B," and "C." Quote Link to comment Share on other sites More sharing options...
Wombat Posted July 8, 2010 Share Posted July 8, 2010 Try calling Don Howell of Haveco in Tucson. His e-mail is: [email protected], phone number : (520)940-1778. He is the sales manager for National Aircraft. We still have several 707/720 series horizontal stabs and I checked them today. We have two full sets of hinge fittings (both halves) but the may need bearings. Aside from that, they look pretty good. Our elevators are -1 and -2 but the IPC shows the hinge fittings as the same PNo. Bob M You can also contact me via e-mail at: [email protected] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.