C-130 Technical
1,312 topics in this forum
-
- 2 replies
- 1.9k views
First let me all say Hello to everyone! Newbie here! Im applying for a job as a Planning Assistant and have been asked to create test maintenance program for a specific type of aircraft and scenarios accompanying it, in this case a Lockheed C130B set for PDM Jan 2008. I have a basic set of maint. programs to get reference from, but will appreciate your help in determining the following: 1) Which main Components are to be replaced? 2) Which small components are to be replaced? The scenario is: a)Aircraft total Flying hours is 17,920.00 b)Aircraft status is unserviceable. c)Aircraft\'s last PDM is 82 months ago. d)Aircraft flying hours since last PDM is 540.0…
Last reply by Big poppa, -
-
Talon II CG
by Hush- 3 replies
- 2.6k views
Quick question - Can anyone recall what the C/G was/is for a Talon II (zero fuel, zero cargo). Thanks- Hush
Last reply by 1685FCC, -
Youngstown Hercs
by Guest- 7 replies
- 3.1k views
Trying to determine what, if any, defensive equipment the following Youngstown Hercs may have: 91-09141, 142,143, and 144 Can anyone let me know? John
Last reply by Llecrupwt, -
hi to u all in the -6 v have a chapter who deal with special inspection v got a new guy in the quality ensurens and he want as to do some sp inspection even if its a day by day fault any comment
Last reply by talons1555, -
- 5 replies
- 3.6k views
Hi guys I got a problem I need your thoughts with. Recently one of our birds twice turned back after oil temperature exceeded +-90°C at altitude. History: The aircraft just completed ISO, and post-dock runs had oil temps getting up to 100°C at ground idle. OAT was in mid 40\'s. Two different oil coolers were fitted, and oil tank was drained and serviced with new oil. After this it was released. The next mission off base the in-flight problem occurred, and the engine was removed for test cell evaluation. In the Cell I started by draining all the oil from tank, RGB, ADH, oil cooler, and motoring the engine to empty all the oil hoses and tubes, and changed all …
Last reply by HerkPFE, -
NVG Compatible Glass
by Guest- 10 replies
- 4.9k views
I know that some, perhaps all of the MC-130E\'s had new windshields installed for improved compatibility with Night Vision Goggles (NVGs). The original glass for the E models had transmissivity losses in the light spectrum of the NVGs. Does anybody know how many other platforms have been modified; and is NVG compatible glass available from Lockheed as part of the build for the J-models? John
-
- 7 replies
- 4.4k views
Have a prop on a -16 that will not pitchlock. Prior to us getting the plane for ballistic foam install, the squadron had the same problem. They changed pitchlock reg., valve housing, then the gearbox sh*t the bed and the prop was seized on the shaft so they r2\'d the tq meter, gearbox, prop/dome. Sooo. They had a good pitchlock after all of that...once...so it could get here. We have tried all manner and techniques IAW pubs, and otherwise without success. It will overspeed without a problem, but does not even think about locking. Re-Indexed about 6 times (1x=2 then 3 master). Tried getting low/ref tq at about 97% then going to 1077 before locking and hitting g…
Last reply by Lkuest, -
Accoustical Beacon
by Guest- 1 reply
- 2.3k views
Does anybody have a good source for DK120 beacon batteries?
Last reply by Shadoif,
