C-130 Technical
1,312 topics in this forum
-
- 1 reply
- 590 views
Hi Folks, I'm currently planning a new module, the fuel-management. Can anybody help me with the question why the fuel management panel of a J-model (the one with the rotary switches and digital readouts) has only one tank selector? What is that rotary switch controlling? I dont find anything about a fuel selector in the public available schemata. Regards Thomas If anybody ist interested in the current status of my sim: https://c130-sim.weebly.com/
Last reply by munirabbasi, -
-
- 9 replies
- 1.1k views
Hye guys. I really need help. I had an experienced on this issue. Mine generator disc indicator on the overhead panel not illuminate during test. Before test, my aircraft do experience generator out light and failed bearing light illuminate in flight. Pilot tried to disconnect the generator with the gearbox using generator disconnect system, however the indivator didnt illuminate and it forced pilot to shutdown #3 engine to avoid catastrophic mechanical failure. On the rectification after the flight, it found that the generator had broken with shaft do also broken. From my understanding, failed bearing light is due to mechanicle failure or maybe due to the broken of the g…
Last reply by munirabbasi, -
- 2 replies
- 706 views
Reasons of burning out of Heading Coupler #1. Two Heading Couplers got burned in #1 position, one after another, while voltage and wiring found okay.
Last reply by tinyclark, -
- 4 replies
- 894 views
Hello Herc masters!I"ll be thankfull if you could provide me Drawing no. 3305083 Rev. A, necessary for applying SB 82-790 CW Widepread Fatigue Damage Inspections and TCTO 1C-130-1908.Thank you very much!
Last reply by munirabbasi, -
- 1 follower
- 4 replies
- 1.6k views
At the end of the flight, when the aircraft is reconditioned: When I set the Air conditioning Master Switch to OFF or AUX VENT, the breaker cabin press and AUX Vent triggers after 2 seconds. On positions NO PRESS, PRESS MAN or AUTO PRESS, the breaker does not trip ... I have a doubt about a piece of equipment but I would like to have your avionics opinion. Thank you
Last reply by Check Team FR, -
- 0 replies
- 582 views
If any AE 2100D3 engine prop balance sometimes detected and didn’t do any rectification jobs. What are the problems will be happened? Please give me Any practical or theoretical idea. Thanks
Last reply by sharif101, -
- 1 reply
- 572 views
Hello Herky people, I want to know how to use exterior lightning on the ground (day/night),in flight(day/night) depending on weather condition. thanks
Last reply by NATOPS1, -
- 2 replies
- 743 views
What is the role of fuel vent check valve ?
Last reply by smain, -
- 6 replies
- 1.9k views
Question for you guys. I have a c130h transferring fluid from the aux system to the utility system. Ive replaced the Ground test valve and the utility system accumulator (which had a leak internally). Neither of those parts solved it and it is still happening. Thoughts on where to go from here?
Last reply by Leakybirds, -
- 1 reply
- 691 views
KC-130T buno 313 and up, Having an issue where the CARA will lose altitude intermittently while in flight. Sometimes it will happen on takeoff or descent other times it will happen while cruising. (Aircrew will sometimes associate it with nav select switching but cannot be duplicated) CARA will fluctuate under 50 feet while airborne causing GPWS to go off for low altitude sometimes resetting the breaker will return it to normal other times if terrain changes it will return to normal on its own. Have replaced pilots indicator, CARA R/T and antennas but gripe still remains. Also I have shot the cables with a TDR and they seem normal. Any insight would be greatly apprec…
Last reply by tinyclark, -
- 3 replies
- 949 views
Hello all, Working on a KC-130T-30 and having an issue with the #2 and #4 generators holding a load. Replaced multiple components: #4 gen contactor, one of the bus tie contactors, #2/4 GCP, #4 voltage regulator. Generators will power on and give good freqs and voltages but when switched to on will not carry essential bus or a heavy load. Occasionally we can get either to pick up a bus or remove applied loads and slowly turn items on till the gen out light illuminates and freq and volts are zero. Have verified wire continuity and voltages while gen is operating normally everything checks good. When gen is in a failed state the normal voltage at the voltage regulator …
Last reply by Fargusmcg, -
- 0 replies
- 497 views
good evening to everybody im experiencing a "RADAR DEGRADED" CAUTION ACAWS on a C130J with a generic diagnostic message LPCR BIT FAIL FC3442010. The radar seems to work fine but after the power up bit completes the CAUTION pops up, troubleshooting the fault isolation for this fault codes nothing looks bad. I replaced all the LRUs and the ECBUs which apply power to the system. Any hint?
Last reply by sasa71, -
- 5 replies
- 1.1k views
Hello Avionic Wiring Expertise! Kindly see yellow marked column of image and explain with technical reference Best Regards Munir Abbasi Home of Hercules Pakistan
Last reply by munirabbasi, -
- 8 replies
- 1.9k views
Hello T56A -15 power plant Pneumatic Expertise T56A-15 (C-130 E model) engine can provide approximately 155 pounds of air flow per minute at 635F and 125 pounds per square inch of gauge pressure. Bleed manifold pressure gauge is mounted in F/deck (direct gauge) display approximately 70 PSIG .where remaining pressure of the engine flow? Best Regards Munir Abbasi Home of Hercules Pakistan
Last reply by munirabbasi, -
- 4 replies
- 1.1k views
Hello Pneumatic expertise Identify and purpose of mark image Munir Abbasi Home of hercules Pakistan
Last reply by NATOPS1, -
- 4 replies
- 1k views
whenever i am running the APU, the fire warning light on both master warning light and the APU T-handle light come up and remain steady once i put ON the air condition. however, if the air condition is not running, the operation of the APU remains normal. i have tried to check for bleed leaks from he APU to the manifold and no leak was found. pls i need urgent help on what next to look up to pls
Last reply by NATOPS1, -
- 8 replies
- 1.5k views
Hellow friends and brothers i just wanted to know what are the reasons behind the generator shaft bearing(only front) failure in C-130B ac with T56-A-7B engine.
Last reply by Kamrul Ahsan, -
- 4 replies
- 1.6k views
Hello Herks Hydra Expertise! 1. It has mentioned Intermediate level maintenance T.O of EDP NYAB at 3000 RPM , flow rate of pump is 6 GPM min, where pump is designed 10 GPM at 3650 RPM . when both the pumps (NYAB) In Aircraft utility system working parallel max flow ie 16.93 pressure drop to 1800 psi. how we can calculate flow rate (GPM) of both NYAB pumps when they are working parallel at 3000 RPM? 2 Just assume that aircraft hydraulic utility system ,when No 1 EDP pressure is 3000 psi and No.2 EDP pump pressure 3100 psi how the pressure act passes thru passage of single pipe after isolation check valves ? Best Regrads Munir Abbasi Ho…
Last reply by munirabbasi, -
- 1 reply
- 728 views
I have Prepar 3- 5v flight simulator and have watched Utube videos on start up of the C-130 but could not find an actual written check list procedure as to how to start the 4 engines. Where can I obtain a written list to preform this or any other lists for the C-130? Thanks! email: [email protected]
Last reply by hehe, -
- 0 replies
- 576 views
Hello herks structure expertise If center wing is replaced with the wing of 500HRs EBH Elapsed time What will be EBH of of the aircraft??? Best Regards Munir Abbasi Home of hercules Pakistan
Last reply by munirabbasi, -
- 5 replies
- 947 views
Hello Herks Hydra Expertise! B model aircraft,During Retraction cycle of landing gears with UT system (in-flight) low pressure WX light of UT suction boost pump was Flickered and extinguished when gears were up and locked. Manufacture of Suction pump is able corporation sealed type and without cooling FAN and also without modification (C-130E airplanes AF72-1288 and up and C-13OH airplanes have a suction boost by-pass circuit. The by-pass line contains a restrictor and a check valve that will continuously circulate one GPM of fluid, from the suction boost pump back to the booster system reservoir, to provide a cooler operating boost pump). FE Said operation of…
Last reply by munirabbasi, -
- 4 replies
- 923 views
Hello C130 professionals! In an E Model Hercules, Flight Director Flag (FD flag) came in view on Co Pilot side PFD on ground during normal checks. Against the defect, all associated LRUs were replaced/swapped with serviceable ones. Even the PFD was swapped with pilot side, yet the flag did not disappear. Continuity of wiring was also double checked and was found SAT. No visible issue was observed yet the flag did not disappear. Autopilot engages without any defect and is working fine. Any ideas as to what might cause this or any previous experience, please do share. Thanks!
Last reply by munirabbasi, -
- 3 replies
- 807 views
Hello Fire extinguisher Squib Herks expertise. Life cycle of C-130B/E model aircraft Squib is not mentioned neither TOs 1C-130H-2-26JG-20-1 nor IC-130B-2-10 and IC-130B-2-7. but life of squib is mentioned in Service news in Vol 18,no1 which is not applicable in our fleet. any T.O which provides guide line for life of squib ,installed on Hercules aircraft. any expert opinion Munir Abbasi Home of Hercules Pakistan
Last reply by munirabbasi, -
- 4 replies
- 1.1k views
Hello Herks Hydro Expertise! Retraction cycle Timing of Right landing ( B model aircraft) is exceeded from prescribe given time sec ie ,38 seconds with UT hydraulic system but when retracting the landing gear with AUX hydraulic system on ground timing is with in limit ie 17 second . We have replaced right side of landing gear, the flow regulator, controllable restrictor valve, one way restrictor, hydraulic motor ,gear box,landing brake lock and HI.Torque two speed valve but defect was repeated again and again in every sortie. any expert opinion Best Regards Munir Abbasi Home Hercules Pakistan
Last reply by munirabbasi, -
- 0 replies
- 536 views
hello herky guys..has anyone heard or know about training flight touch n go cant be abort? any reference about it pls..
Last reply by mrjpc130h,
